Smart Leadership in the 21st Century

Although we may claim that the world has gravitates from authoritarian rulership and that most countries in the world operate under a democratic ambience, but in certain parts of the world and over certain organisations preside some leaders who still lord over their followers without giving them a say at all in the affairs.

Every nation and society has its own leader, but what distinguishes the smart leaders in the world today from the bosses and the not-so-smart leaders? Consider the following traits.

The first trait of the smart leader in the 21st Century is that the leader has to EVOLVE. He should keep up with the times, with the latest techniques and updated information. Knowledge is power and the knowledgeable leader is not one that can be easily deceived or pushed about. The societies that use the most advanced methods in everyday life are the ones that lead the pack in today’s world.

In addition, the SMART leader is:

S- Simple/Straightforward: The good leader has to mean what he says, and say what he means. He must not be deceitful. His followers must be able to trust him and take his word for it in every circumstance. What he does not intend to do, he should determine not to say it. Also, the smart leader in this century must be a man of simple ways, words and lifestyle.
Gone are the days when leaders were marked by 100-foot billowy robes, with twenty servants carrying the clothes from behind. This can be tolerated from a bride in a wedding ceremony, but not from the world-class 21st Century leader. He should not live a complicated lifestyle or be unnecessarily extravagant. Simplicity does it these days.

M- Malleable: As mentioned earlier, the smart leader must be malleable, not rigid. He must be able to bend his views when it is necessary. He should be able to lower his standards when it is necessary.
Compromising your views at certain times is not a trait of the weak, but that of the intelligent. He should not insist on the status quo, or cling to ideas just because “that’s the norm here!” The norm is usually dumb. He must have a teachable heart that can learn new information at every opportunity. He must be malleable enough to learn from both young and old, rich and poor, male and female-anybody.

A- Accountable: Aha! Did the smart leader expect I won’t add this? It is inescapable for the smart leader to be accountable for all the human and other resources committed to his care. He must not be corrupt. Every penny in his administration must be accounted for. He must guard his citizens and his domain with the same intensity as well.

R- Resourceful: The leader must also be one with a limitless river of ideas constantly flowing for the betterment of his organisation. He must be very creative and actually SMART. As in, really intelligent. If a dumb leader is put over a domain, he will mismanage and diminish it. The leader must be able to multiply the little he has been committed with, and multiply it. He must commit to being constantly trained in order to further equip his intellectual arsenal.

T- Technology Literate: Finally, in this Internet Age, many wars are won or lost on social media. The smart leader in the 21st Century must be one who is very much versed in at least some high-tech devices. He must not be an illiterate with the computer or with the internet. He must make it a point of duty to learn the use of one new technological gadget every six months. That will set him apart and make him the man/woman to beat by the other leaders. He will find out pretty soon that he is a trail blazer in leadership. It does not matter whether he is presiding over a family or over an entire nation, such person will be a trail blazer.

Emmanuel Sokefun is a freelance article writer, in addition to being a novelist, poet, hymnist, songwriter and a lover of the academia.

Posted in homepage | Comments Off

Coffee Shop On Wheels – How About Parking At a Rest Stop for Weary Travelers?

One thing us retired entrepreneurial company founders like to do is think up new potential start-ups. Luckily for me, I’ve started a little think tank that has several of us on board. Lucky also for you, if you want to start a business, we don’t mind sharing our ideas with you, heck maybe you can get some funding and make a go of it, do something great, fill a niche and be the next successful start-up entrepreneur out there. I wish you well.

Okay so here is a recent idea we came up with, actually it is an old idea, rehashed. There have actually been some franchises that do this. This has a different twist. Do you know how rest stops along the highway sometimes have vendors selling food? Usually, someone has a deal with the state and gets a license to do business there? How about a mobile food truck that serves up Lattes, Mochas and Espresso – high-end coffee?

One of our think tankers suggested we call it “R and R” and try to get it licensed in all states.

Indeed, there are mobile restaurants in every state almost – some have purposely made it tough on the sector due to restaurant industry lobbyists. I like the name idea, and I had once prepared a business plan for my brother’s company – the potential company would have been named Jumping Java – with on-site corporate parking lot delivery. The runners would take the orders and deliver the coffee inside the company. R&R might be a good name, but some people drink coffee to pep-up and not to rest or relax, so that might not be the right name. Unless you told them the name was for “Ramp-up and Race-Forward” or something. Well, it would be a huge logistic nightmare, you’d need commissaries for the mobile units, home bases, required by law.

You’d need permission where to park, licenses in every city, most cities have ordinances for what they might deem street vendors thus, controlling when and where you can set up. Each state is required by law to send it out to bid, and then the lowest common denominator, minority company paying ridiculously low wages would be competing with you while their employees lives 10 people to a house, and they got a 15% bid advantage for being a minority or woman owned business, and an SBA loan, that others could not get.

Then the government would PR the crap out of it telling everyone how some Bozo Congressman was providing jobs. It would be a nightmare to deal with the state. Worse, they often close the rest stops for no reason, and you’d be out of business for that time period. Then there is the crime issue, and angry people that the bathrooms are not cleaned, even though that isn’t your fault. You should see the stuff that goes on at rest stops. Although having someone there selling something does add a level of safety, because people are there.

One think tanker noted; “Sometimes there are people giving free coffee at rest areas trying to make their roads safer.”

Yes, I’ve seen that, and I am in favor of it. Maybe the state would pay for just plain “free black coffee” and you could sell the higher-end coffee drinks or, the state gives you free rent, if you give the cheap black coffee out for free and then are free to sell the expensive stuff. Be Great, Don’t Hesitate.

Posted in homepage | Comments Off

How Being Authentic Will Help Your Network Marketing Career

People can see through smoke and mirrors. Maybe it was different in years past but these days people are very smart. In this article, we are going to talk about how being authentic will help your network marketing career.

Let me first let you know that being authentic to me does not mean that you share all of your business with the world. Being authentic means being in line with whatever message it is that you are sharing. If you are talking about financial freedom and you don’t have it, you should be talking about how you are working toward it and what you are learning instead of trying to make people think that you already have it.

One of the things I remind myself and teach to my team is that the truth is good enough. Maybe we are not impressed with the success that we have so far but it could be just what the person we are talking to needs to hear.

When I am talking about success, I don’t even necessarily mean monetary success levels, it can even mean that you’ve enrolled one person or got one customer. Whatever your story is, you have to be good with your story and be authentic. This does not mean that you tell the world all of your problems. People don’t need to hear all of that. You can give your story after you’ve gotten through your challenge. When was the last time people were inspired by a rags to rags story?

When you are talking to people just connect with another human being and be genuine in your writing and any other communications as well. The more that you do this, the more people will know, like and trust you. We all know that these are the people that we love to do business with and that is how your business will be helped by being authentic.

Posted in homepage | Comments Off

All You Need To Know About The PTFE Ring Gasket

Gaskets are one of the basic elements for preventing the leakage, mist formation, and spray outs after the flange guards. They are installed at the flange joints, pipelines or valve joints, etc. to prevent the leakage of the harmful gasses and liquids from the gap between the joints. The gaskets are proven to seal the gap between the surfaces of the joints and provide better protection at an affordable price. They bear the high pressure of the high-temperature chemicals and have corrosion resistance properties. They are used in many industries like automotive, aerospace, chemical industries, electronics, military industries, pharmaceuticals and appliances.

The Types Of The Loads That A PTFE Ring Gasket Bear Are As Follows:-

The initial compressive load is the bolt load which pulls the gasket material into surface defects to form a strong seal.
The hydrostatic end force which tends to separate the surfaces of the flange joints when the arrangement is over pressurized.
The internal load pulling the part of the gasket exposed to inner force. It tends to blow the seal out of the joint.
The various metals and materials are used to make gaskets which can meet the demand of various industries. The range covers non-metallic, semi-metallic and metallic gaskets. The industries mostly install PTFE ring gaskets which are made up of a material and provide better performance in the operation.

This type of the gaskets used widely in the chemical industries and pharmaceuticals because it avails numerous benefits, besides acting as the protective seal for the leakage. It reduces friction to provide a rigid usability and avoid any of the damage or failures.

There Are Many Factors That Are Affecting The Performance Of The Gaskets:-

The Flange Load – The pressure on the two surfaces of flange joints churns the product and compresses the gasket to create an even tighter seal. The gaskets are enough tough to bear this load and the bolts of the joints should be tightened enough to create a perfect seal.

Temperature – The high temperature sometimes affects the efficiency of the product, but the gaskets are made of the high-grade material which is actually temperature resistant.

Fluid – The chemicals flowing through the pipelines is highly corrosive in nature and the liquids are harder to sell in comparison to the gas. The PTFE ring gaskets seal the liquid and prevent it from flowing outside. The product also prevents the contamination of the liquid.

Posted in homepage | Comments Off

Credit Card Processing

The credit card is a commonly used financial tool and its use forms an important part of personal finance. A credit card though simple to use has a networked system and structure that enables payment through a plastic card with minimal chances of misuse and fraud. The credit card industry mainly comprises of:

  • Card Provider: Cards providers are very few in numbers. Some of the known credit card providers are: VISA, MasterCard, JCB, American Express etc. The logos of these card providers are what we very often see on entry to a store.
  • Card Issuers: financial institutions such as banks issue a MasterCard or VISA or any other card to card holders. This card will have logos of both the financial institution and the card provider.
  • Card Acquirer: The card acquirer processes the cards accepted by any store and this service is known as credit card processing or merchant account services.
  • Merchant Account: The merchant or stores have an account with a credit card processing service to enable credit card payments in their store.

Every credit card transaction initiates a flow of information and exchange of money between the credit card processing organization, card issuer and the merchant account authorized and conducted by the credit card provider.

Credit card processing services do not limit their services to acceptance of credit cards alone but also enable the processing of various payment mediums such as: debit cards, electronic cheques, gift cards and other forms of payment.

The credit card processing organization performs the key task of authorizing the credit card when presented to the merchant instantly. The credit card processing organization then debits the card issuers account and credits their account with the amount of purchase made by the card holder.This implies that the card issuer pays the card processing services for the transaction. The card services organization then makes the payment to the merchant after deducting a transaction processing fee.

This is the procedure followed for every credit card transaction and it is made easy for you due to the efficiency of various parties that are involved in making credit card transaction an easy process.

Posted in Uncategorized | Comments Off

Social Media: Why Do Some People Look Towards Social Media To Give Them Approval?

In the beginning, it could be said that people generally used social media to get in touch with their friends and family; the people who they actually knew. But as time has passed, this is no longer why a lot of people use it.

As for the people who only use it to stay in touch with their friends and family, it is likely to be no different to how it was when they first started using it. Now, they might notice that the site they use no longer looks the same as it did or that others use it differently, but that could be as far as it goes.

Friends

If one only added people who they knew when they first started, there is the chance that this is no longer the case. Even if they have only met someone once, they could still end up adding them to their ‘friends’ list.

When this takes place, they might only be thinking about how this will have an effect on how other people perceive them. For example, if one has a certain number of ‘friends’, they can end up being seen as popular.

One Purpose

What this can then show is they are more concerned with how they look than they are with connecting to others. This doesn’t mean that they won’t talk to others; it just means that it is unlikely to be their priority.

And if one has this approach when they go online, there is a strong chance that they have a lot of ‘friends’ who are just the same. In addition to this, it might also be important for them to look right in other ways.

The Perfect Life

What this can then mean is that they will want other people to believe that they live the ultimate life. As a result of this, they are going to have to be very careful when it comes to what they share.

It will be vital for them to share pictures where they are having a good time, and being in exotic locations will also help. If one looks as though they are enjoying themselves in a warm country, it can be normal for people to believe that they lead a good life.

The Right Image

Along with this, one can also have the need to look right, and this is going to be relatively easy. Not only can they choose what pictures to upload; they can also change how they look.

Through using the right angle and the right light, one can take pictures where they look their best. Once this has taken place, one can make a few major or minor changes to the images.

An Act

In this sense, it might be accurate to say that when one uses social media, they are putting on a performance. This is their stage, and they are choosing to be someone who has their life together.

But like someone who acts in the real world, they are not going to be able to truly connect to anyone when they are playing a role. Who they are has been put to one side, and their needs are going to end up being unmet.

Approval

When one has this approach when they go online, it is likely to show that they have a strong need for approval. If their ‘friends’ don’t give them the kind of feedback that they need, they could end up being in a bad way.

However, this doesn’t mean that this is the only way they will come across when they are this way. For one thing, one might not try to create the impression that they lead the perfect life, and they might not even edit their pictures.

A Number of Ways

One could receive the approval they need through posting funny videos or memes that make people think about the world differently. What this shows is that one is not going to need to rely on their appearance and neither are they are going to need to travel all the time.

And as long as they have some kind of device, it can allow them to receive approval whenever they need it. It is then not going to be necessary for them to delay gratification; they can fulfil this need instantly.

A Closer Look

When it comes to the people who behave in this way and the people who don’t, it is clear that there is a big difference. What this can show is that the people who do need a lot of approval are emotionally dependent on others.

As they are unable to handle how they feel, they need other people to regulate their inner world. But this is not the only thing that can be involved here; they can also be in a position where they haven’t got any close friends.

One Direction

If they had people around them who they were close to, they would be able to receive the approval and the validation they need from them. And through having the ability to regulate their inner world, they wouldn’t depend on other people to do it for them.

The reason one doesn’t experience life in this way and looks towards social media to give them approval can be the result of what took place during their early years. This could have been a time when they didn’t receive the kind of care that they need in order for their brain to develop in the right way.

Conclusion

The ability to regulate their emotions wouldn’t have developed, and this would have stopped them from feeling comfortable enough to reach out to others when they need them. Ultimately, no one is their own island, and this is why human beings need other people.

But when one doesn’t receive the right care, it can set them up to be dependent on others, or to go the other extreme and become extremely independent. What this emphasises is how important it is for children to be brought up in the right way, and for there to be help available when this doesn’t happen.

Prolific writer, author, and coach, Oliver JR Cooper, hails from England. His insightful commentary and analysis covers all aspects of human transformation, including love, partnership, self-love, and inner awareness. With over one thousand two hundred in-depth articles highlighting human psychology and behaviour, Oliver offers hope along with his sound advice. His current projects include ‘A Dialogue With The Heart’ and ‘Communication Made Easy’.

Posted in homepage | Comments Off

How to Take a Vacation And Make More Money In Your MLM Business

Being able to make more money in your business when you are taking a vacation sounds amazing and it is possible. In this article, you will learn how to take a vacation and make more money in your MLM business.

There are 3 reasons that you will be able to make more money in your MLM business because of your vacation so get ready to pack your bags.

Shows the Lifestyle

The last thing people want to “sign up” for is another job but when you can show how network marketing allows you to travel and enjoy life, more people will be interested in joining your team and coming on board with your business. Show people the lifestyle by going out there and living life. Not everyone is impressed by your ability to be a shut in.

Sense of Urgency to Get Things Done

When we are getting ready for vacation we understand that we need to get things done. We often get more done in the last few days before a vacation than we have gotten done all month. This is because our brains are helping us work toward the reward instead of just trying to keep busy with mundane tasks.

Clears Your Mind

After you get back from your vacation, you are going to have a new drive and desire to get things done. You will be operating with a clear mind. It is kind of life rebooting your brain so that you can think clearly and be able to get things done in a much more efficient manner.

So, now that you know, get ready to take your vacation and reap the benefits. Grow your network marketing business and enjoy your life at the same time.

Posted in homepage, Uncategorized | Comments Off

Why Should I Engage in Outdoor Recreation Activities?

More and more people engage in outdoor activities these days, as outdoor sports are becoming very popular. The top recreational activities include kayaking, jogging, walking, hiking, and camping.

This article is for the people who love to spend their time outdoors, enjoying new adventures in fresh air.

How can outdoor recreational activities be beneficial to you?

The foremost advantage of spending time outdoors is gaining a good mental spirit and healthy balance of your body. Not only will it help in giving you the liveliness that everyone should have, but it will also pump your life force and the love of living.

Activities such as walking, bird watching, kayaking and camping all make you feel happier while appreciating the beauty that we often forget during our busy hours at the office. Nowadays the stress level has increased so much in everyone's life that everyone, without exception, describes a small break to get rid of this stress. Sometimes a small walk in the park will do the trick and can lighten up your tensions and make you feel happy.

In today's hectic life styles, we hardly find time to spend with our families and friends. Engaging regularly in various outdoor activities can help you create much stronger bonds with your family and friends. You can interact and talk more with your friends and family while sharing the astonishing experiences of a different outdoor activity each time you go out.

How can outdoor recreation help you in saving money?

Our lives are never smooth and secured; Everyone comes across various difficult times in their lifetime. Taking the time to engage in simple outdoor recreations will not only help you mentally, but you will also find that it costs close to nothing. For example hiking does not cost anything when compared with cycling. All you need is a pair of good shoes and a mountaintop to hike to. Another example is simply playing outdoors with your kids. Nothing will beat playing soccer or tags with your kids, especially when you take time off from a stressful job.

While there is other activities like hunting that are somewhat costlier however they will provide you with a lot of thrills and great sense of accomplishment. If you can not afford spending money on such activities then you still have many options that will definitely suit your pocket.

You should try to spend as much time as possible in these types of activities. You should also encourage your friends, family and kids to spend such a wonderful time together building good memories. Nothing can be more enjoyable and beneficial than gaining a good and healthy lifestyle by being in the outdoors.

Take full advantage of the beautiful world we live in and its alluring nature that surrounds us that we inheriting for centuries from our ancestors.

Posted in Uncategorized | Comments Off

The Meaning Of Quality In Health Care

The process of receiving health care services at the correct time in the appropriate way and to get the best possible outcome is defined as quality health care.

Six attributes of health care quality

• Safety – Care should not harm any patient.

• Patient centered – Individual needs should be taken care of when providing care.

• Timely – Care should be provided exactly on time.

• Effective – Care must be based on evidence.

• Efficient – Wastage of time should be reduced.

• Equitable – Equal care should be provided to every patient.

What is quality health care?

The meaning of quality health care is not the same for all people. According to some patients, quality care is to consult a doctor, to get proper treatment from the staffs of a hospital and to have a physician who can spend much time with the patient. But all these things are secondary. Clinical quality of care is the most important thing because more lives can be saved by providing evidence-based and high quality care.

Does quality equal safety?

Yes, quality equals safety. The quality of care is to be improved by the health care providers because it can save more lives of the patients.

How is health care quality measured?

Outcome indicators and process indicators are the two ways of measuring quality of care. Timelines and baseline practices are measured by process indicators. Complication rates, mortality rates and infection rates are measured by outcome indicators.

These indicators can be looked at by the consumer to compare the hospitals. National accreditations, recognitions and state of the hospital should also be looked at by you to measure quality.

What are quality measures and quality indicators?

The process of converting the medical information of a patient into percentage or rate to analyze the quality of care provided by the hospitals to their patients is called a quality measure. You will be given information by quality measures about how the patients are provided care by the hospital. This quality information can be used by you to compare the quality care of different hospitals.

What role do nurses and doctors play?

A very important role is played by the doctors and nurses. Quality care should be provided by all the nurses and physicians, clinically and satisfactorily. All the staffs in a hospital such as the receptionist, scrub nurse, hospital administrator, physician and the X-ray technician are responsible in providing quality care to all the patients.

Remember all these features when you will go to get quality health care from any hospital.

Posted in Uncategorized | Comments Off

3D Scanning – What You Need To Know

3D scanning is a process of capturing digital information of object shape using equipment that has light or laser to measure distance between the object and the scanner. The non-destructive and non-contact scanning technology uses lines of laser light capturing the exact shape and size of the object. The fine details of even the smallest objects are captured and the process comes in handy in so many industries and fields. Some the areas that 3D scans are commonly used include automotive, manufacturing, medical and aerospace.

3D laser scanners capture thousands of points per second, allowing quick inspection of parts. It is a process that is ideally suited for measuring and inspecting contoured surfaces and also complex geometries that require lots of data for accurate description and where traditional measurement methods are impractical.

What are the advantages?

3D scanning has become very popular among business people in different fields. You can now easily find 3D scanning services for all needs you might have especially as far as accuracy and high quality productions are concerned. The popularity of the process is as a result of the many advantages it has over other traditional options. Some of the advantages that come with the process include:

1. Quick capture of all physical measurements of any given physical object; with 3D scanning, the size of the object does not matter.

2. Saves time when designing. The high definition details of objects make it possible for designers get it right with the first trail, hence saving time, even with productions that would have otherwise proved to be complex and time consuming.

3. Ensures perfect fit of parts with the first try. 3D has literally taken the guess work of production processes, especially for those dealing with prototypes and creating parts. The detailed information collected from an object is accurate and hence it is very rare to have parts that have any functional defects.

4. It captures engineering optimization that is necessary in manufactured parts. The process offers more confident to manufacturers in terms of meeting standards and any set objectives in the manufacturing process of parts. Using the scans, it has become even possible for manufacturers and designed to compare between designed and built models conditions so manufactured parts are top quality.

How does it help the design process?

3D scans are largely used in the design process of various products. Model scanning proves beneficial in the design process because:

· It increases effectiveness when working with shapes and parts that are complex

· It provides updated versions of CAD models that are outdated

· It makes it possible to replace missing parts or older parts

· It helps product designing so that someone else’s part can be accommodated

Which areas can in be used in?

3D scanning is very effective and has become a popular option in various fields including:

· Historical artifacts

· Prototyping or reverse engineering

· Entertainment industry for games, TV and movie productions

· Medical and dental

· Inspection

· Marine

· Construction and architecture

A 3D scan can prove highly beneficial in different sectors. If you do not have what it takes to enjoy the accuracy of 3D scans, you can get help from service providers who offer all kinds of scanning services.

Posted in homepage | Comments Off